3 Reasons Why You Need To Use A Hot Water Heater Stands

gas water heater stand
Hot Water Heater Stands

You have probably just bought your new water heater, and the first thing that you notice is that the heater has no legs to offer support and keep it elevated.

So now you are asking yourself the million dollar question, do I really need to use  hot water heater stands to keep my water heater elevated?

The main reason you need to have your water heater placed on a hot water heater stands is to prevent fire incidents. Lifting your water heater prevents flammable fumes and vapors’ from spilled gasoline or any other combustible fluid from lying on the floor in the garage.

You might think that the new models of water heaters “FVIR” are resistant to flammable vapor ignitions, and can be placed anywhere anyhow, but trust me, most jurisdictions’ won’t be happy about this.

In every country around the globe, there are plumbing codes and standards that every water heater owner needs to comply with, so they can ensure the safety of their families and their own.

This is the reason most areas have safety codes that you might not comprehend. In case you do not understand the codes, then you are advised to speak to a professional local plumber or water heater retailers regarding why you should make sure that you raise your water heater after installing it. Nonetheless, you do not want to get dragged into court due to a fire caused by your water heater.

Even if your water heater is the new flammable ignition resistance model, it needs to stay off the ground in case it’s placed inside the garage where a car might get parked. Besides, once you place it on an ideal hot water heater stands, you won’t have to clean up as many contaminants out of the vents and filters.

Whatever you do, don’t you ever place your water heater on the concrete.I personally cringe every time I come across a water heater set right on the concrete. This will make them rot out, shortening their lifespan as a result.

I recently just replaced a 30-year-old water heater unit in my parent’s basement. The unit had a water heater stand that kept it off the ground by 18 inches or so.

In the span of 25 years, there were lots of incidents, such as flooding, in the basement. The water heater lasted through all these situations as a result of its raised height.

How high should your water heater stand lift up your water heater unit?

Your water heater stand needs to lift your water heater at least 18 inches off the ground. You have probably heard some forums arguing that as long as the water heater is not placed inside the garage or your house, you do not need to elevate it. My advice is, it is still a water heater unit and ought to be raised 18 inches off the ground to avoid issues with the government.

Any water heater with an ignition source needs to stay high such that the ignition source is not shorter than 18 inches above the floor.

Buy a water heater stand and watch your water heater last for generations.

4 thoughts on “3 Reasons Why You Need To Use A Hot Water Heater Stands”

  1. Gas water heaters can sit directly on the floor if they are FVIR (flammable vapor ignition-resistant). All gas 30, 40, and 50-gallon water heaters sold to the North American market after 2005 must comply with ANSI Z21. 10.1a-2002 standards.

    Reply

Leave a Reply to Admin Cancel reply