Even though both the range cord and dryer cord are intended for use with a 220 or 240-volt circuit to deal with the higher electrical power requirement of a range or a dryer in comparison to that of the other smaller household appliances in your home, they are extremely different from one another and should in no way be interchanged. The connecting plugs and receptacles for dryer cord and range cord not only seem completely different but are made to cope with distinct amounts of current, measured in amperes.
What are the differences between dryer cord and range cord?
- The difference in the amount of electric flow.
- The difference in the plug.
Voltage can be regarded as very similar to water pressure, or the pressure of which the current is pushed throughout the wires. Amperage, in contrast, is a way of measuring the amount of electrical power flowing over the wires. An electric range cord needs more amps as compared to an electric dryer cord. That is the reason why electric range cords are rated at 50 amps whereas electric dryer cords are rated at 30 amps.
It is quite easy to tell the similarity between a 3-wire range cord plug and a 3-wire dryer cord plug. Each of the two cords have three prongs. The two flat prongs in both the dryer cord and the range cord are very hot, each supplying about 110 or 120 volts to a total 220 or 240 volts to the range or the dryer. The third prong located further from the wire itself serves as ground and neutral wire. On a range cord plug, the third prong is flat-shaped just like the first two prongs. However, on a dryer cord plug, the third plug prong is bent at the center at a right angle to form an L shape.
Dryer cord ( left) and range cord (right).
A 4-wire range cord is safe to use than a 3-wire range cord because most range accessories such as timers, fans, and electronic displays work at about 110 or 120 volts and need fewer amps compared to the heating elements. The seldom-used current moves back to the primary circuit box through the neutral wire. Given that the ground and neutral wire are attached to the range chassis, the surface area of the range will conduct electricity. You will, therefore, suffer severe shock when you touch both the spigot and the range as you will act as a current path to the ground.
However, this is not the case with a dryer cord. The dryer cord is safe to use because the neutral and ground wire is not connected to the dryer chassis.
4-wire range cord.
For more information about range cord and dryer cord, kindly visit our website for power supply cord and experience amazing offers on original dryer cord and range cord.